Long infrared
The long infrared is between 4 and 10µm. These wavelengths can be obtained by different technologies:
Ceramic emitters , robust products commonly used in industry, have a fairly high thermal inertia (several minutes). They are used for deep heating
The applications of radiant heating are numerous, particularly in plastics: heating before shaping (thermoforming), temperature maintenance, drying in industries such as screen printing, food, wood, etc.…
Armored elements are also used
Long infrared
The long infrared, with a wavelength between 4 and 10 µm, is the widest field of work, the ceramic emitters working at lower temperatures allow the preheating or the surface heating of the materials.
These emitters can also be used for heating living beings.
- Maximum temperature medium to full power: 200°C (125W) to 680°C (1000W).
- Range of products available in various shapes: curved or flat, rectangular or square.
- Possibility of installing reflectors to direct the radiation area towards the area to be heated.
- Some emitters are equipped with a thermocouple, type J or K, to optimize the temperature of the emitter.
Ceramic infrared emitter
Acim Jouanin offers 2 ranges of curved or flat emitters, for a maximum surface temperature of 700°C.
- Heating wires embedded in a ceramic structure,
- Transmitters covered with a special enamel, protecting them from corrosive attacks,
- Power supply by 2 wires protected by ceramic beads, length 100 mm,
- Fixing by metal clip (bracket) and spring clipped on the terminal block
- Variation of emitters fitted with an incorporated K thermocouple.
- Supply voltage 230V mono
.
Ceramic emitters have many advantages:
- long life: 20,000 hours
- splash water and corrosion resistant
- uniform radiation
Stock range :
- Curved Emitters (Curved):
- Emissive surface: 122 x 60 mm, from 125 to 500 W.
- Emissive surface: 245 x 60 mm, 150 to 1000 W.
- Voltage: 230V mono
- Emitters bare or fitted with a J or K thermocouple
.
Standardized range:
- Rectangular flat emitters:
- Emissive surface: 122 x 60 mm, from 125 to 500 W.
- Emissive surface: 245 x 60 mm, 150 to 1000 W.
- Voltage: 230V mono
- Emitters bare or fitted with a J or K thermocouple
.
- Square flat emitters:
- Emissive surface: 60 x 60 mm, from 125 to 250 W.
- Emissive surface: 122 x 122 mm, 150 to 750 W.
- Voltage: 230V mono
- Emitters bare or fitted with a J or K thermocouple
.
We can offer you models with specific finishes:
- Other powers among the dimensional ranges indicated,
- Wire length greater than the standard,
- Transmitters with built-in insulating layer
- ….
- Power tolerance: -10% / +5%
- Our products bear the CE marking because they comply with Directives 2014/35/EU (Low voltage / LVD), 2014/30/EU Electromagnetic Compatibility (EMC) and 2011/65/EU ( RoHs ) (+2015/863/EU modifying the Annex II of Directive 2011/65/EU)
- Complies with REACH regulations
For optimal use of ceramic emitters, we advise you to use metal reflectors (see below)
The use of ceramic emitters requires the installation of associated products:
- Cables (electric, thermocouples) & accessories (sockets, connectors, etc.)
- Temperature sensors (thermocouples, PT100 probes)
- Temperature regulation : electrical boxes, temperature controllers, thermostats …
Downloadable sheets :
Accessories for ceramic infrared emitter
In order to obtain a better yield, the energy must be concentrated on the product to be heated. Acim Jouanin offers you a range of reflectors suitable for curved emitters.
- Aluminized sheet reflector
- Central cutout for passage of the transmitter terminal block and holes for passage of the spacers and the domino.
- Reflector supplied with its fixing kit (spacers, nuts, ceramic domino).
- Some reflectors can accommodate multiple emitters of different sizes
.
In order to extend the connection of our thermocouples, we offer extension and compensation wires, stranded, type J and K. The conductors are PVC insulated for resistance up to 100°C or glass silk for resistance up to 300°C, with or without metal braid.
We offer a range of compensated connectors , type J and K , mini or standard format, available from stock . They are used to connect thermocouples to measuring devices. The negative and positive terminals are of different sizes to avoid reverse polarity.
Stock range :
- Reflector length: 125 to 1000 mm
- Current 16A
- Range of reflectors that can accommodate 1 HTE emitter (122 x 60 mm) up to 2 HTE emitters (122 x 60 mm) + 3 FTE (122 x 60 mm)
Downloadable sheets :
Additional Products
Other Infrared Emitters 
