Internet Explorer / Edge Legacy browser compatibility

It seems that you are using an expired version of your browser, you can still browse our site, however display problems may appear.
We advise you to update your browser in order to be able to take full advantage of our site or to change your internet browser .

+33 (0)2 32 62 34 20
Search
Close this search box.

Unit Heaters and Industrial Radiators

Industrial convectors or radiators are robust devices designed for the auxiliary heating of industrial premises or storage areas by natural convection.

For explosive atmospheres, we also produce ATEX-certified industrial heaters.

Our unit heaters are intended for forced air heating of construction sites, barnums, greenhouses, etc.

Unit Heaters and Industrial Radiators

Industrial convectors or radiators are robust devices designed for the auxiliary heating of industrial premises or storage areas by natural convection.

For explosive atmospheres, we also produce ATEX-certified industrial heaters.

Our unit heaters are intended for forced air heating of construction sites, barnums, greenhouses, etc.

Industrial Radiators

Technical characteristics

The robustness of our radiators is ensured by a solid metal frame. In addition to our standardized range , compact or long models, we also manufacture to measure according to your specifications.

Compact models:

  • Carcass in perforated zinc-plated steel sheet.
  • Shielded heating circuit with fins, in AISI 321 or 304 stainless steel with alu-zinc fins.
  • Connections protected in IP53 box.
  • RIS.1.5T and RIS.3.T models, equipped with thermostats:
    • three-pole control thermostat, range 13 to 83°C ± 7°C
    • safety thermostat.

.

Long models:

  • Carcass in perforated zinc-plated steel sheet.
  • Shielded heating circuit with fins, in AISI 321 or 304 stainless steel with alu-zinc fins.
  • Connections protected in IP66 box.
  • Connection by 2-wire cable + earth (3 x 1.5 mm²), length 1500 mm, with Schuko type plug.
Product range

Standardized range – Compact model :

  • Length: 365 to 605 mm
  • Power: 1500 to 3000 W
  • Voltage: 230 V / 400 V switchable three-phase

.

Standardized range – Long model :

  • Length: 620 to 1120 mm
  • Power: 1000 to 2000 W
  • Voltage: 230 V single phase

.

Custom manufacturing :

We also produce specific models, with options:

  • Superior power;
  • All stainless steel finish;
  • Heating indicator;
  • ….
Downloadable documents

Downloadable documents:

  1. Technical data sheet

ATEX Industrial Radiators

Atex-convector-manufacture-acim-jouanin
Technical characteristics

Intended for heating air in explosive environments, our ATEX radiators are used in gas and dust zones , in storage rooms, distribution or delivery sites, in industries such as:
– chemistry (fine; mineral, agrochemical …);
– oil industry, refineries;
– paint booths (solvents) ….

.

Our ATEX radiators meet the following conditions:

  • Zone 1 (gaz), zone 2 (gaz), zone 21 (dust), zone 22 (dust).
  • Gas groups IIA, IIB, IIC and Dust groups: IIIA, IIIB and IIIC
  • Temperature class: T3 (200°C)
  • Ambient temperature: -20°C to +40°C
  • Certification: Ex II 2 GD – Ex db II C T3 Gb – Ex tb IIIC T200°C Db

.

Features :

  • Exterior casing and feet in stainless steel.
  • Heating body made up of electric resistances, contained in a steel sheath with steel sheet fins protected by a stainless steel casing.
  • Boîtier de raccordement type d (enveloppe antidéflagrante), en alliage léger, indice de protection IP 65.
  • ATEX II C 3/4″ NPT cable gland for power cable.
  • Internal M6 ground terminal and an external M4 ground terminal.
  • Thermostat , range 4 – 40°C, with adjustment knob accessible outside or inside the box (depending on models).
  • Integrated safety Thermostat .
  • Feet, in stainless steel, drilled with 4 oblong fixing holes: 14 x 7 mm. The radiators must operate in a horizontal position, fixing downwards, either on the floor or on horizontal brackets.
  • Devices supplied with instructions for use, declaration of conformity and INERIS type certificate.
Product range

Stock range :

Depending on the model, radiators can be supplied with or without room thermostat:

  • RADF series: Standard radiator, without temperature regulation
  • RADF.TH and RADF.IN series : Models fitted with an adjustable room thermostat

.

To select a device, indicate the chosen criteria:

  • Power: 1000 , 1500 or 2000W
  • Voltage: 230 V mono, 230 V tri or 400 V tri, depending on the model.
  • Overall length: 986 mm (1000W) to 1606 mm (2000W)
  • Thermostat : For models equipped with a thermostat, specify whether the adjustment button is internal or external to the box (230V mono models only)
Regulatory characteristics

Industrial radiators certified Ex II 2 GD – Ex db II C T3 Gb – Ex tb IIIC T200°C Db, for use in explosive atmospheres.

  • EC type examination certificate number: INERIS 06ATEX0025X
  • Equipment complying with the following directives and standards: 2014/34/EU, EN IEC 60079-0, EN IEC 600079-1 and EN IEC 60079-31
  • Power tolerance: +5% / -10%
Downloadable documents

Downloadable documents :

  1. Technical data sheet
  2. Definition form

Industrial Unit Heaters

Technical characteristics

Mobile forced air electric heating, our range of industrial unit heaters available from stock can be used in many areas such as construction sites, warehouses, workshops, etc.

As they do not generate combustion gases, they can be used in spaces without openings or ventilation. These unit heaters can be placed on the floor or hung on the wall using brackets available as an option.

  • Heating by armored resistors
  • Air circulation by fan.
  • Protective grilles, front and rear of the device
  • Power selector allowing operation in ventilation only , at 50% or 100% of the power.
  • Built-in control Thermostat
  • Appliance equipped with a safety thermostat, with manual reset,
  • Carry handle
  • With a power of 2 kW to 22 kW , these unit heaters are suitable for all types of premises whether they are supplied with 230V single-phase or 400V three-phase.
Product range

Stock range :

  • Power: 2 to 22 kW
  • Air flow: 300 to 2400 m3/h
  • Voltage: 230 V mono or 400 V three-phase , depending on models.
Downloadable documents

Downloadable documents:

  1. Technical data sheet

Ventilo - Convectors

Technical characteristics

Forced air heating device particularly suitable for construction machinery:

  • Shock-resistant steel case , covered with a granite epoxy paint.
  • Three-way blowing.
  • 3-position switch: heating + ventilation regulated by thermostat, off or ventilation only.
  • Portable appliance supplied with room thermostat ( air outlet 45°C to 65°C), safety thermostat, PG 11 cable gland and wall mounting bracket.
  • IP22 protection.
  • Weight: 5.5 kg.
  • Reduced sound level: 50 dB.
Product range
  • Electrical voltage from 400 V (50 Hz) to 440 V (60 Hz) single-phase, indifferently, without switching.
  • Power: from 2000 to 2600W, depending on voltage
Downloadable documents

Downloadable documents:

  1. Technical data sheet