Flexible Surface Heaters
The flexible heaters consist of a screen-printed heating tape, insulated with 2 layers of silicone or kapton, allowing work at 200 ° C max.
Their low thickness gives these flexible elements increased reactivity allowing precise temperature control.
They stand out from other flat heaters thanks to their flexibility which facilitates their installation. This technology makes it possible to design particularly complex shapes, while guaranteeing optimum temperature uniformity.
Flexible Surface Heaters
The flexible heaters consist of a screen-printed heating tape, insulated with 2 layers of silicone or kapton, allowing work at 200 ° C max.
Their low thickness gives these flexible elements increased reactivity allowing precise temperature control.
They stand out from other flat heaters thanks to their flexibility which facilitates their installation. This technology makes it possible to design particularly complex shapes, while guaranteeing optimum temperature uniformity.
Intended for indirect heating and temperature maintenance of solids and liquids, this technology allows the heating of flat surfaces, but also curved which cannot be done by metal resistances.
Only available custom made , our flexible furface heaters are made according to your specifications and can be personalized on request.
Silicone Heaters
Resistant to humidity and chemicals, this technology allows uniform heating, even in the case of complex shapes.
- Electrical insulation of the heating tape by 2 sheets of silicone reinforced with fiberglass, IP 64.
- Double electrical insulation resistance
- Power supply via a 2-wire silicone cable, in the thickness, under patch.
- Fixing: they can be supplied with a high temperature adhesive coated on the face opposite the connector. By default, they are not adhesive. Other fixing methods: Straps with hooks, velcro or springs …
- Max power density: 0.7 W / cm²
- Operating temperature: -60 ° C to + 200 ° C (180 ° C for models with an adhesive side)
- Accessories: the heaters can be offered with temperature sensors (J thermocouples or PT100 probe), thermostats and temperature limiters.
In addition to our standard rectangular silicone range, we produce custom-made elements, according to your specifications: preformed, distribution of heating surfaces, etc.
Standard range ( non-stocked items) :
- Width: 100 to 200 mm
- Length: 150 to 400 mm
- Power: 50 to 533 W, 230 V single phase.
- Max load : 0.7 W / cm²
- Cable length: 500mm.
Custom-made : The silicone heaters are made to measure according to your specifications, following a feasibility study. Below is a summary of the main features:
- Max dimensions: width 595mm x length 2500mm;
- Thickness: 0.8 to 1.5mm ;
- Connectors: in the thickness of the heater or under patch;
- Voltage: 230 V mono, other voltages on request;
- Accessories: rheaters can be customized by temperature sensors (J thermocouples or PT100 probe), thermostats and temperature limiters;
- Custom manufacturing according to your specifications;
- UL certified resistance.
- Max dimensions: width 595mm x length 2500mm;
This list is not exhaustive: Fill in our definition form and consult us
Manufacture according to standard EN 60335-1 :
- Wattage tolerance: + 5% -10%
- Leakage current< 0.75 mA / kW
In addition to the kapton heaters, we offer you the necessary equipment for their power supply and for the regulation of your process:
- Cables (electric, thermocouples) & accessories (sockets, connectors, etc.)
- Temperature sensors (thermocouples, PT100 probes)
- Temperature regulation : electrical boxes, temperature controllers, thermostats …
Silicone Heaters:
- Technical sheet
- Instructions for use
- Definition form (to be created)
Kapton Heaters
Kapton heaters are heating elements 0.2 mm thick, particularly flexible, intended for heating equipment at very low temperatures. They benefit from high reactivity, thanks to their excellent thermal transfer.
They are also suitable for environments requiring chemical resistance without outgassing.
- The heating circuit, engraved on a metal sheet, is insulated by 2 layers of kapton, IP 64 ;
- Heater witrh double electrical insulation ;
- Power supply via 2 silicone wires;
- Fixing: they can be supplied with a high temperature adhesive coated on the face opposite the connector. By default, they are not adhesive. Other fixing methods: Straps with hooks, velcro or springs.
- Max power density: 1.5 W / cm² (depending on application);
- Operating temperature: -270 ° C to + 200 ° C (-30 ° C to + 180 ° C for models with an adhesive side);
The heaters are custom-made, according to the specifications of your specifications.
Custom-made:
Kapton heaters are made to measure according to your specifications, following a feasibility study. Below is a summary of the main features:
- Max dimensions: width 285 mm x length 550 mm ;
- Thickness: 0.2-0.3mm ;
- Connections: by 2 wires;
- Voltage: 230 V mono, other voltages on request;
- UL certified resistance;
This list is not exhaustive: Fill in our definition form and consult us
Manufacture according to standard EN 60335-1.
Wattage tolerance: + 5% -10%
Heaters compliant with Reach (1997/2006) and Rohs (2011/65 / EU) directives
CE
The use of strip heaters requires the installation of associated products:
- Cables (electric, thermocouples) & accessories (sockets, connectors, etc.)
- Temperature sensors (thermocouples, PT100 probes)
- Temperature regulation : electrical boxes, temperature controllers, thermostats …
Kapton heaters
- Technical sheet
- User manual (To be created)
Other Strip Heaters 
