Cables and Accessories

You have ordered an electrical heating element from Acim Jouanin. You will find in this section the necessary equipment for its electrical supply, its thermal insulation and various accessories .

Do not hesitate to also refer to the “Temperature Control” page to ensure the correct operation of your process.

Cables and Accessories

You have ordered an electrical heating element from Acim Jouanin. You will find in thisacim jouanin section the necessary equipment for its power supply, its thermal insulation and various accessories.
Do not hesitate to you also refer to the “Temperature Control” page to ensure the proper functioning of your process.

The particularity of our accessories is that they are suitable for use in a “high temperature” environment:

Electrical Outlets and Wiring Accessories

Technical characteristics

Electrical sockets and panel sockets

To power your heating element and other electrical devices, we offer a wide range of male and female electrical connectors .

With flat or round pins , 2 P + T or 3 P + T , voltage 230 V or 400 V , current up to 32 A , depending on the available space, these sockets are suitable for industrial environments.

The round pins , type FFRE8, are suitable for our heating resistors fitted with a pin cover connector.

We also offer sockets or sockets, male, with flat plugs, to be mounted on a panel or a switchboard.

Wiring Accessories

The crimp terminals, round or Faston, allow easy and efficient assembly of the terminal connections of heating resistors or infrared emitters.

You can also extend your power cables with our high temperature ceramic dominoes, for 2 or 3 conductors.

Terminal plates , allowing the connection and coupling of three-phase devices. Plates bare or fitted with threaded terminals.

Product range

Electrical outlets and sockets

  • Round pin female sockets
    • Models suitable for “Pin cover” connectors.
    • Ceramic sockets: straight or angled, 2 P + T, 400 Vac, 25 A, T ° max 300 ° C
    • Silicone sockets: straight or angled, 2 P + T, 250 Vac, 16 A, T ° max 200 ° C
  • Compact male and female sockets
    • Compact, straight-shaped, cable-mounted models, STAS type
    • 2 or 3 P + T, up to 400 Vac, 16 A, T ° max 90 ° C max
    • STAS models
  • Male, female and industrial sockets
    • Robust models for industry, type LEG
    • Male and female sockets: straight, 2 or 3 P + T / + N, up to 400 Vac, 32 A, T ° max 100 ° C
    • Base to be mounted on panel: 3 P + N + T, 400 Vac, 16 A, T ° max 100 ° C
  • Male, female and sockets, with flat pins
    • Male connector: straight, 2 P + T, 250 Vac, 16 A, T ° max 200 ° C
    • Female sockets: straight, 2 P + T, 250 Vac, 16 A, T ° max 155 ° C
    • Sockets to be mounted on panel: 2 P + T, 230 Vac, up to 16 A, T ° max 200 ° C

Wiring accessories

  • Ceramic dominoes
    • 2 or 3 poles, conductors up to 16 mm², 450 Vac
    • Temperature resistance: 200 ° C
    • Template: small footprint (height 17 mm) or standard (23 mm)
  • Terminal board
    • C221 soapstone plates, bare (PBP and PBG / 1), max T ° 1250 ° C
    • C221 soapstone plate, fitted with M5 terminals (PBPM), max T ° 1250 ° C
    • Dimensional (L x W): 55 x 35 mm (PBP and PBPM) / 78 x 48 mm (PBG / 1)
  • Crimp terminals
    • Available shapes: Male and female faston, round and rectangular
    • Suitable for wire sections up to 4 mm². Sold in strips, to cut.
Downloadable documents

Electrical outlets

Wiring accessories

General catalog of Acim Jouanin sockets

Electrical cables and sheaths

Technical characteristics

Electric wires and cables

We offer high-temperature , single- core or multi -conductor electrical wires and cables for a large number of industrial, chemical…

The stranded core can be copper, nickel-plated copper or nickel.
It is protected by one or more insulating sheaths, in silicone rubber (T ° max 180 ° C) or braided with siliconized glass silk (T ° max 350 ° C continuously).

For better mechanical strength, some multicore cables are protected by a galvanized steel metal braid.

Electrical insulating sheaths

To reinforce the electrical protection of the power cables, they can be protected by insulating sheaths.

These braided fiberglass high temperature protective sleeves are coated with silicone rubber or silicone varnish.

Heat-shrink tubing

High quality heat-shrink tubing in cross- linked polyolefin, flexible and flexible, with excellent dielectric, chemical and mechanical qualities.

2 ranges: single wall or double wall coated with adhesive for sealing the covered product.

Product range

The electric cables

Different packaging available: 25, 50 and 100 m

  • Service life: -60 ° C … +180 ° C continuously
    • Stranded cables, copper or nickel-plated copper core, silicone rubber insulated.
    • Available in unipolar 0.75mm² wire
    • Available in multi-conductor 3 to 6 P + T, section up to 6mm²
  • Service life: -60 ° C … +280 ° C continuously
    • Multi-strand cables, copper or nickel-plated copper core, siliconized fiberglass braid.
    • Available in single-core wire up to 6mm²
  • Service life: -60 ° C … +350 ° C continuously
    • Multi-stranded cables, nickel-plated copper or nickel core, silicone-coated fiberglass braid.
    • Available in single-core wire up to 6mm²
    • Available in multi-conductors 3 to 6 P + T, section up to 10mm²
  • Service life: -60 ° C … +450 ° C continuously
    • Multi-strand cables, nickel core, siliconized mineral fiber braid.
    • Available in 2.5mm² single-core wire

.

Electrical insulating sheaths

  • Service life: -60 ° C … +250 ° C continuously
    • 2 ranges available in stock.
    • Braided fiberglass sleeves coated with silicone rubber , very flexible, self-extinguishing. For insulation of electrical and electronic constructions.
    • Braided fiberglass sleeving coated with a heat-resistant varnish. Peak temperature (a few minutes): +350 ° C.
  • Service life: -60 ° C … +280 ° C continuously
    • Braided fiberglass sleeves impregnated with a heat-resistant varnish, self-extinguishing.

.

Heat-shrink tubing

    • 2 ranges: single wall and double adhesive wall
    • Shrinkage coefficient on the diameter: 2: 1 (single wall) / 3: 1 (double wall)
    • Operating temperature: – 55 to 135°C (single wall) / – 55 to 110°C (double wall)
Downloadable documents

The electric cables

Electrical insulating sheaths

General catalog of Acim Jouanin electric cables and sheaths

Thermal insulators and electrical insulators

Technical characteristics

Thermal insulators:

In order to retain or protect against heat, we offer thermal insulation in the form of flexible layers or semi-rigid plates .

Having a low thermal conductivity at high temperature (> 0.3 W/mK at 1000°C), these insulators are easy to handle, cut and install.

Electrical insulators

Mica sheets are recognized for their high dielectric properties at high temperatures, even at low thicknesses. Available in rigid sheets, they can be cut precisely by our numerical control machines, according to your specifications.

Soapstone ceramic beads are intended, for example, for the high temperature electrical insulation of power supply wires. Their conical shape allows them to fit into each other ensuring continuous protection while maintaining a certain flexibility.
Maximum operating temperature 1000 ° C

Ceramic cement is used on potting or patching applications, requiring high electrical insulation and thermal conductivity. This material is supplied as a powder which hardens after mixing with water and is usable up to a maximum of 1400°C.

Product range

Thermal insulators

  • Flexible tablecloths
    • 2 types of insulating fiber sheets sold in the form of rolls
    • CERA 8002 (96 kg / m3, thickness 6 mm, thermal conductivity 0.29 W / mK at 1000 ° C)
    • CERA 9002 (128 kg / m3, thickness 13 mm, thermal conductivity 0.25 W / mK at 1000 ° C)
  • Rigid plates
    • Plates made from insulating fibers
    • Characteristics: 290 kg / m3, 1000 x 500 mm, thickness 3 mm,
      thermal conductivity 0.15 W / mK at 800 ° C
    • Possibility of cutting by numerical control, according to your specifications.

Electrical insulators

  • Mica sheets
    • Semi-rigid sheets made of mica (> 90%) and silicone binder
    • Service temperature: 500 ° C max
    • Dimensions: 1200 x 1000 mm, thickness 0.3 or 0.4 mm. Other thicknesses on request.
  • Ceramic beads
    • Soapstone beads, maximum temperature for use: 1000 ° C
    • Internal diameter: from 2.7 mm to 5.5 mm
  • Ceramic cement
    • Maximum temperature of use 1400 ° C
    • Thermal conductivity 1.6 W / mK
    • Packaging in 1 kg bag
Downloadable documents

Thermal insulators

Electrical insulators

Catalog of thermal and electrical insulation Acim Jouanin

Complementary accessories

Technical characteristics

Thermal grease

The GRIPACIM promotes heat transfer , by filling the space between the heating resistor and the part to be heated.

Adhesive tapes

The adhesive glass cloth tape withstands continuous use at 130 ° C.
Roll dimensions: 19 mm x 50 m.

Kapton tape is a technical adhesive, with excellent resistance to high temperatures up to 180°C continuously, making it possible to electrically insulate parts.
Available in 2 widths: 19 mm and 50 mm. 50 m rolls.

Cutting pliers

Pliers, with ultra-fine ground edge for high cutting quality, designed for the plastics industry. 3 angles of inclination of the cutting edge: 15 °, 45 ° and 90 °.

Product range

Thermal grease

  • Thermal grease
    • GRIPACIM paste based on copper and aluminum pigments and semi-mineral oil.

.

Adhesive tapes

  • Glass fabric adhesive tape
    • Glass fabric coated with a thermosetting natural rubber adhesive, continuous resistance at 130 ° C max
    • Dimensions: 19 mm x 0.16 mm x 50 m
  • Kapton Adhesive Tapes
    • Kapton coated with a silicone adhesive, recognized for its electrical insulation properties, resistance to 180 ° C max continuously.
    • Dimensions: 19 mm x 0.07 mm x 50 m (ADH8050)
      Dimensions: 50 mm x 0.07 mm x 50 m (ADH8051)

.

Cutting pliers

    • Range of 6 pliers held in stock, for cutting carrots of max. 12 mm
    • High strength steel pliers with non-slip plastic coating
    • 3 angles of inclination of the cutting edge: 15 °, 45 ° and 90 °
Downloadable documents

Thermal grease

Adhesive tapes

  • Glass fabric adhesive tape

Cutting pliers

Acim Jouanin accessories catalog

Additional Products

Temperature Sensors

Temperature Sensors

Find out more

Regulation and temperature sensors

Temperature Control

Find out more
logo-titre-blanc-2Temperature Sensors and Control Items