How to heat
in an ATEX environment?
An explosive atmosphere ( ATEX ) is a mixture with air under atmospheric conditions, of flammable substances in the form of gases, vapors or dust in which, after ignition, combustion spreads to the whole of the unburned mixture. ( Standard 2014/34/EU )
Acim Jouanin offers you suitable solutions for safe heating.
Several models of heaters are available to you
We are certified to define, design and provide you with solutions for heating liquids, solids or air, suitable for any type of explosive atmosphere. Our heaters are intended for surface industries and are of device category 2 , for gas and/or dust fuels ( Ex II 2 G or D )
Our products comply with the ATEX 2014/34/EU standards and the IECEx EN ISO/CEI 80079-34 international standard. Our EU Declaration of the INERIS 06ATEXQ703 type recognizes the conformity of the manufacturing of our products according to the ATEX 2014/34/EU standard. This certification is confirmed annually by an audit carried out by a certified organization of our manufacturing unit.
Present on the ATEX market since 2006 , Acim Jouanin has voluntarily undertaken the process of certifying its products to IECEX since 2014 .
Qu'est ce qu'une zone ATEX ?
Une atmosphère explosive (ATEX) est un mélange avec l’air dans les conditions atmosphériques, de substances inflammables sous forme de gaz, vapeurs ou poussières dans lequel, après inflammation, la combustion se propage à l’ensemble du mélange non brulé. (Directive 2014/34/UE)
Intended for heating fluids in explosive environments, our ATEX and IECEX screw-in immersion heaters are qualified to work in gas zones 1 and 2 and dust zones 21 and 22, for temperature classes T6 (85°C) to T1 (450°C) .
Our entire range of ATEX products is equipped with a type “d” electrical connection box (flameproof enclosure)
Destinés au chauffage de fluides en environnement explosible, nos thermoplongeurs à visser ATEX et IECEX sont qualifiés pour travailler en zone gaz 1 et 2 et poussières 21 et 22, pour des classes de température T6 (85 °C) à T1 (450 °C).
L’ensemble de notre gamme de produits ATEX est équipé d’un boitier de raccordement électrique type “d” (enveloppe antidéflagrante)
For high power ratings or special mounting requirements, explosion-proof immersion heaters can be mounted via a flange.
Our models equipped with a DN 80 to DN100 standardized flange, registered under the CE type examination certificate number INERIS 06ATEX0046X and recognized IECEX INE 14.0054X are intended for gas and dust heating.
Immersion heaters fitted with a DN100 to DN300 flange and certified Ex II 2 G – Ex db IIC T6 to T1 Gb are used in zone 1 (gas) and zone 2 (gas) .
They can also be mounted on a non-certified circulation unit.
Particularly suitable for the storage of hazardous materials, Acim Jouanin has designed a range of robust ATEX radiators, available from stock , to heat your premises in an explosive atmosphere in complete safety.
Certified Ex II 2 GD – Ex db IIC T3 – Ex tb IIIC T200°C Db , they can be used in gas zones as well as in dust zones, in an atmosphere between -20°C and +40°C.
Custom made, our ATEX air duct heaters are intended for the heating of air or gas in circulation, in an explosive gas zone.
They are specifically sized to meet your needs, depending on the fluid heated, the circulation flow, the initial and final temperatures, etc. II 2 G – Ex db IIC T6 to T1 Gb certified, they are equipped with integrated double thermal safety.
They are designed for use in environments between -20°C and +60°C.
We also offer ATEX and IECEX cast heaters , flat shape, cylindrical shape, etc., custom made.
These IECEX INE 14.0051X certified heaters are intended for use in gas zones 1 and 2, as well as in dust zones 21 and 22, for temperature classes T6 (85°C) to T1 (450°C).
There are many applications for Ex II 2 GD – Ex d IIC T1 to T6 – Ex tb IIIC T85°c to T450°C Gb cast heaters: mounting on sheaths or in petrochemical furnaces….
You have a project ?