Flat ceramic resistors

Flat ceramic resistors can heat up to around 600 ° C, solids by direct heating, as well as fluids and gases by indirect heating. Their design uses 2 different technologies:

Radiant type ceramic resistors (PCTR) consist of a heating element isolated by flat open ceramics. They are intended for heating scroll tunnels or furnaces.

Rigid ceramic resistors (PCR) consist of a heating element dielectrically insulated by ceramic modules, protected by a metal frame. They are used for heating molds.

Flat ceramic resistors

Flat ceramic resistors can heat up to around 600 ° C, solids by direct heating, as well as fluids and gases by indirect heating. Their design uses 2 different technologies:

Radiant type ceramic resistors (PCTR) consist of a heating element isolated by flat open ceramics. They are intended for heating scroll tunnels or furnaces.

Rigid ceramic resistors (PCR) consist of a heating element dielectrically insulated by ceramic modules, protected by a metal frame. They are used for heating molds.

Available only to measure , our ceramic clamps are made according to your specifications and can be personalized (connectors, tightening, etc.) and fitted with accessories, depending on their temperature of use.

Radiant Ceramic Plates (PCTR)

Technical characteristics

Radiant type ceramic resistors are particularly reactive and allow immediate radiation to the surface to be heated.

  • Heating wire in nickel chrome 80/20 .
  • Electrical insulation by flat rectangular ceramics, 80 mm wide .
  • Connection by high temperature siliconized glass silk insulated wires, protected by ceramic beads.
  • Metal frame stiffening the assembly and allowing it to be fixed.
  • Fixing by brackets fixed on the metal frame.
Product line

Flat ceramic resistors are made to measure , according to your specifications. Below is a summary of the main features.

    • Width: 83 mm +/- 2 mm
    • Length: 90 to 2000 mm +/- 2 mm.
      Including non-heating minimum lengths of 30 mm at each end.
    • Thickness: 18mm
    • Metal frame: stainless steel as standard. Optional Inconel for very high temperatures
    • Connection by high temperature nickel wires insulated with siliconized glass silk, protected by 100 mm of ceramic beads
    • Voltage: 230 V or 400 V, other voltage on request.
      Single phase: 2 or 4 wire output / Three phase: 6 wire
    • Stainless steel brackets
  • Example of specific realization: Remote connection (addition of a larger non-heating zone between the connection and the heating zone)

This list is not exhaustive: Fill in our definition form and consult us

Regulatory characteristics

Manufacture according to standard EN 60335-1 :

  • Power tolerance: + 5% -10%
  • Leakage current< 0.75 mA / kW

Flat ceramic resistors comply with Reach and Rohs directives

Associated products

The use of flat resistors requires the installation of associated products:

Downloadable documents

Ceramic radiant resistors:

  1. Technical sheet
  2. Definition form
  3. User manual (To be created)

Rigid Ceramic Plates (PCR)

Technical characteristics

Rigid ceramic resistors are intended for high temperature heating, by conduction, of vessel walls or trays.

This technology, flexible thanks to the soapstone elements, allows the heating of large dimensions.

  • Heating wire in nickel chrome 80/20 .
  • Electrical insulation by soapstone elements.
  • Protection by an enveloping sheet.
  • Connection by high temperature wires protected by ceramic beads, terminals or cable outlet under the cover.
Product line

The rigid flat resistors are made to measure , according to your specifications. Below is a summary of the main features.

    • Width: 15 to 250 mm . Superior dimensions, consult us.
    • Length: 80 to 1500 mm +/- 2 mm.
    • Thickness: 11.5mm
    • Enveloping sheet in aluminized sheet, stainless steel or inconel depending on the temperature of use.
    • Connection by:
      • Nickel wire insulated with siliconized glass silk protected by ceramic beads, on the top of the resistance or in the thickness
      • Cable under cover, on top of resistance
      • Threaded terminals M4 to M6, depending on the intensity.
    • Voltage: 230 V single phase, as standard. Other voltage on request.

This list is not exhaustive: Fill in our definition form and consult us.

Regulatory characteristics

Manufacture according to standard EN 60335-1 :

  • Power tolerance: + 5% -10%
  • Leakage current< 0.75 mA / kW

Flat ceramic resistors comply with Reach and Rohs directives

Associated products

The use of flat resistors requires the installation of associated products:

Downloadable documents

Rigid ceramic resistors

Associated products

Temperature Sensors

Temperature Sensors

Find out more

Regulation and temperature sensors

Temperature Control

Find out more

Cables
& accessories

Cables & Accessories

Find out more